Are you fed up with the slow wi-fi connection? Looking for a range extender that stretches and expands the WiFi signal range. The Juplink WiFi Extender exclusively works to rebroadcast and extend the high-performance connection across your whole home. It includes Multi-user MIMO technology and also develops the WiFi network coverage of your existing one. This also extends the dual-band and 2-gigabit port connection by this system. The beamforming technology also makes this wireless range extender system work more excellent.
The 2 Gigabit Ethernet port of this wireless range extender moves this range into the Wi-Fi bridge mode connection. Letting unite this wired connection device such as an online gaming console, smart TV, DVR, and Smart TV with your WiFi network connection. If you place this Juplink range extender too far away then it delivers weak reception. In addition, if you keep this range extender midway then it gives a good reception. Apart from this, when you have to place this system too close then it delivers a stronger connection. So, let’s connect the network of this Juplink system after installing it.
Steps for the Juplink WiFi Extender Setup
Generally, you can install the Juplink extender with the two easiest methods. The installation process of the Juplink extender is furnished below.
(i) Vanin WiFi Extender Setup using the WPS Method
Following are the tips and amazing steps for the installation, it’s all are mentioned below in a series.
- Foremost, plug the Juplink wireless range extender into the wall outlet.
- After that, wait until the 2.4GHz and 5GHz band signal lights are not blinking.
- When it flashes with colour light, then simply hold your existing router’s WPS button.
- Make sure your wireless router is plugged in or connected with the power precisely.
- So, let’s hold the WPS button, similarly also hold up your WIFi range extender WPS button.
- Kindly push it up, just for two to three minutes and generate an internet connection among both appliances with a strong bond.
- While you have to press the WPS button of both devices, then, it will spontaneously sync and unite with your existing device WiFi password.
- So, the Vanin Juplink extender connected impeccably with each other. So, let’s take this network and experience its network to fulfil your all desires.
(ii) Vanin WiFi Range Extender Setup with Web browser
Here are some obstacle-free steps to the Juplink extender setup. Let’s use these steps and install your wireless extender as follows in the order of these mentioned steps.
- First and foremost, kindly plug your wireless range extender, if you do not plug it into the wall outlet.
- Wait for a second, until the dual-band (2.4Ghz + 5GHz) WiFi signal light has not blinked.
- If the LED signal light instantly is solid, then, let’s take its connection between your mobile phone, computer, and any other system.
- Now, unite this wireless range extender network, locate first in your computer WAN settings this range extender network name (SSIDs).
- Afterward, wait for a second, your computer is still connected to your smart WIFi range extender network connection.
Launch a browser first to the Juplink extender login
- Once it is connected, then simply move on to the web interface and insert in URL 192.168.0.2 (Jump Link WIFi Extender default IP address).
- Make sure your mobile phone is precisely connected to the server. If this is connected then it directly moves you to the Juplink extender admin page.
- Search this address, in case, if this is invalid then you should use instead of IP address Juplink website address, it is https://www.juplink.com.
- After locating it, kindly enter the necessary details into the Juplink wifi range extender login box.
- Enter the Juplink WiFi range extender’s default password and username.
- Finally, click on the “Login” option and let’s modify the settings of this range extender.
Modify the settings of the Vanin WiFi repeater
- Choose a Vanin WiFi repeater mode and click on the auto-copy router section.
- Here in the below, a list of active wireless routers is present on your computer screen.
- It shows the SSID, channels, Type, authentication & encryption, signal, etc. of your available devices, so, you just choose your current router name.
- Click on the Passphrase, for the pre-shared key format.
- After this, click on the simply save and apply the option to modify settings favorably.
- You just wait for nineteen seconds and wait until it’s not finished.
- Now, the Vanin wireless range extender setup is successfully completed.
Steps to relocate the Juplink WiFi Range Extender
Following are the points to the Vanin Extender reset, it’s all are mentioned below.
- Meanwhile, its countdown is successfully finished, then you can simply relocate the wireless extender.
- Plug it closer to the area, where you have to get a weak or low WiFi connection.
- At this moment, you just use any method from both of them and let’s take the internet connectivity between your appliance.
- Keep your device Within perfect range. The network name is the same as your existing Wifi range extender.
- Verify the Juplink WIFi extender speed glance through.
- If this does not drop perfectly, then only hold the reset button.
- Press it just for three to five seconds and make a perfect bond & connectivity between your appliances.
Amazing Troubleshooting Tricks for the Juplink WiFi Extender
Here are several tips and tricks to fix the errors of this Juplink WIFi range extender. It’s all are mentioned below.
- When the Vanin WiFi Extender is not working, surely the connection between both appliances is not made up perfectly. Just reconnect this system from the power and connect this system with the power again. Hope so, it is working yet correctly.
- In this case, if the Juplink extender is not connected to the internet, then, you will connect this system again with the internet connection. Also, change the channel to using the connection according to your device.
- If 192.168.0.2 not working, then kindly verify the connection of the network first. If this is not working then simply connect your system with the internet again. Check you’re entering the IP address, surely this issue is occurring due to a typo. So, correct it and use it again. These are the tips for the Juplink WiFi Extender Troubleshooting.
- If the Juplink extender has no internet connection, then visit under the settings and apply the setting for a good internet connection. After connecting this system with the network, let’s test again its works now.
- When the Juplink Extender shows a red light error, then only reset your range extender. Press the reset button and hold it up for three seconds. After resetting this system, kindly verify that the 2.4GHz and the 5GHz signal LEDs light.
These are several tricks to resolve the Juplink range extender obstructions. It may help you to fix the diverse errors of this system.
Juplink WiFi Extender Review
The Vanin Juplink WiFi Range Extender is the most superior wireless range repeater. Which only extends the range of your main hub or an existing one. If you are also looking for a device that is compatible with your home system and gives you a positive response in comparison to others then you should use this range extender. It allows you impeccable internet access through this system. To connect this range extender with the network of your router, just use the WPS mode and web interface mode.
Both are the easiest way to access the impeccable connection. Check the Juplink WiFi Extender review from Amazon, Walmart, Bestbuy, Walmart, to buy this high-quality manufacturing system. Moreover, it has powerful signal antennas which are most useful for accessing or catching the internet signal range of this system. The customer reviews this wireless range extender is also too good in comparison to others. Always keep updating the Juplink range extender firmware to always get superior connectivity.