JYH WiFi Range Extender Setup, Troubleshooting and Review
The JYH extender is a wireless dual-band wifi range extender. It boosts the wii network connectivity in the long-distance area. This extender removes the wifi dead zone. Usually the JYH is a company name that manufactures a top-quality networking device that fulfills all the wifi network connectivity. In the other words, the JYH wifi range extender provides high speed wifi and stable signal With dual band technology. This wifi range extender provides up to 1200Mbps performance and boosts internet wifi coverage up to 1200 Square feet. It is a compatible device that works with any standard router, gateway, and access point. Basically the JYH extender is equipped with Four external antennas that extend wifi coverage. This wifi range extenders are designed to increase or improve Wi-Fi coverage, not to directly increase speed.
The setup of the JYH range extender is simple and easy. Press the WPS button to connect to your wifi router. It is easy to connect the existing wifi router and boost the wifi network speed.
Installation of the JYH wifi range extender
The jyh range extender provides the ultra-fast wifi network connectivity. It has two external antennas that manage the wifi network connectivity. If you want to enjoy the wifi network of the jay wifi extender then you need to install it. Generally JYH range extender installation is effortless. There are some steps, which are given below.
- The initial steps, unbox the range extender into the packaging box and check if it comes with the following components like power adapter, ethernet cable, USB cable and other.
- Then, fix the position of the range extender. You need to place the range extender near the router like router and range exetender place in the same room.
- Set the range extender antennas with the proper manner.
- Here power ON the JYH wifi extender and wait until the power indicator lit up.
- If the range extender lit up three lights it means a strong signal.
Now the installation steps of the JYH range extender is over. You can easily enjoy the wifi network connectivity without any trouble.
How to access the we-based login page of JYH wifi range extender?
The JYH range extender provides a steady wifi network by which you can easily stream the 4K videos without any loading. If you want to login the JYH extender through the web browser without any hurdle then you can follow some steps. These steps are as follows.
- Permilarly, make sure your computer or laptop is properly connect the JYH wifi extender.
- Launch any web browser of your choice like chrome, safari, opera and internet explorer.
- In the browser URL bar type 192.168. 10.1, hit enter.
- Afterward, display a login page on the computer’s or laptop’s screen.
- In the login page there are 2 text fields, username and password.
- Here you enter the default username ID and login password(the default login username and password is admin).
- Lastly, you can click “login”.
Now the steps of the JYH range extender login is complete. These were some of its steps, which you can easily follow to login the range extender.
Manual of JYH wifi range extender
The JYH extender is a powerful wifi network extender. It has more network coverage. This extender enlarges the wifi network connectivity, it takes the signal from the existing wifi router for this. Afterward, it gives better wifi connectivity throughout the homes. If you want to know more information about the range extender then you need to read the jyh wifi extender manual. Manual is that which comes with the range extender. All the information is there about the device. If you want to setup the extender then you need to read the manual. But many times half information is there in the extender’s manual. By which users face issues. If you want to completely Setup the extender then you can follow the given below steps.
Setup the JYH wifi range extender via the WPS button
If you want to setup the JYH wifi extender, then it is unpretentious. Every user is easily set up with the WPS button. If you want a JYH wifi extender setup then you easily do it. There are some steps, which are given below.
- The first and foremost steps, plug the range extender into the power circuit and turn on the button and wait until the p[ower LED turns solid ON.
- Presently, press the WPS button of the existing wifi router for 4-5 seconds.
- Within 2 minutes, press and hold the WPS button of the range extender for 4-5 seconds.
- You can wait about 2-3 minutes and verify the wireless LED of your range extender. If the LED green light lit up that means the connection is successful. If the wireless LED flashes red that means the router is far from the range extender.
- Here, relocate the JYH extender and Plug in the range extender into the power circuit about halfway between your standard router and the dead zone
- Wait until the wireless LEDs are lit. Make sure 3 LEDs lit up on the wifi range extender.
After that, the setup steps of the JYH range extender are successfully finished. Now you enjoy the wifi network and say goodbye the router’s weak signal.
Troubleshooting steps of JYH wifi extender issue
The range extender provides ultimate performance and it is very helpful to extend the wifi router’s signal. It fulfils all the requirements needed for a wifi network. But sometimes the jyh wifi range extender not working there are some issues. You can easily resolve the issue with troubleshooting steps. The troubleshooting steps are as follows.
- If the range extender is not working, then you need to check your extender main power is turned ON. If the main power is ON but still it not working then you need to unplug the extender into the power circuit for 2-3 minutes and again plug in.
- You need to verify the signal LED indicator, if the three lights lit up it means a strong signal. If the LED lit up two lights that means general signal. If the LED indicator one light lit up that means a weak signal, you need please move the extender closer to the router.
- During the overheating, extender is not working, you should place the range extender into the ventilated, cool and ary area.
- Sometimes the login page is not accessed of the JYH range extender. You need to verify you use the right IP address. Now, You should check the wifi network connectivity between the extender and device like computer or laptop.
- You also clean the cache history of the browser.
- Time-to-time you should verify the firmware update of the jyh wifi extender.
- In the eventually, follow all the above steps but it is not still working then you should reset the wifi range extender.
Reset the JYH wifi range extender through the Reset button
If the wifi range extender is not working then you can easily reset it through the reset button. Commonly the reset process of the jyh extender is easy. You want to reset the extender then you follow the given below steps.
- Firstly, power ON the jyh range extender waits until the power indicator stay solid.
- Secondly, locate the reset button, the reset button is right side on the jyh extender.
- Here, press and hold the reset button for 10-15 seconds.
- You can use a paperclip or similar object to hold the reset button.
- Afterward, release the button and the LED indicator flashes orange light. That means reset is successful.
JYH wifi extender review
The jyh range extender is a dual band extender that means it supports 2.4 GHZ and 5 GHz frequency bands. It offers up to 867Mbps for 5GHz and 300Mbps for 2.4GHz. This extender has two external antennas that manage the wifi network signal and extend wifi coverage for your smartphones, smart TV, google chromecast, web browsing and more. Ordinarily, the jyh wifi range extender supports WEP and WPA/WPA2 wireless security protocols，the devices in your home or office have the best protection. It also supports only repeater mode and provides 360 degree full coverage.
The range extender is a compatible device like at a time it connects up to 20 devices without any buffering. The setup of the jyh extender is simple with the WPS button. The power smart LED indicator light helps to install in the best optimal location. That means the jyh extender is an optimal device for extend the range and say goodbye the buffering.
Do JYH WiFi extenders work with any standard router?
Of Course yes, jyh extender also work with any wifi router. Most extenders should be able to work with any standard router for this; you just want to make sure the range extender supports 802.11n if you have an 802.11n router. But the WPS button is there on standar router.
Can I manually update the firmware of JYH wifi range extender?
Yep, you easily manually update the firmware of the range extender. To update the firmware, firstly login the extender. Then go to the setting and also click “administration”. After that, select the section “firmware update”. Here, click “browse” and choose the firmware file. In the end, click “upgrade”.
What is the speed of the JYH range extender?
The jyh extender is also a tremendous wifi device, it provides up to 1200 mbps speed. By which you enjoy streaming 4K videos, gaming consoles and music without any buffering.