Macaroon Portable Mobile Hotspot Setup, Troubleshooting and Review

The macaroon portable is a mobile hotspot. It provides internet connectivity through wifi network. You can use this device anywhere in the world because it is a pocket device. Ordinarily the macaroon portable mobile hotspot comes with US 80GB high-speed data & 5GB global data. The connectivity technology of this hotspot is WLAN and USB. Basically the macarron hotspot is a perfect Travel Wi-Fi Hotspot. There is a SIM inside this hotspot which runs Internet connectivity. This device supports cloud sim technology, this technology allows you to enjoy 4G high-speed data without any hassle. The macarron hotspot is a compatible device that means it can share connections with maximum 10 mobile devices like mobile phones, Pads, computers, laptop and more at the same time. It provides better, reliable and steady network connectivity in all the devices.

The setup and management of the macaroon portable hotspot is simple with the app. It works with a 5000mAh battery. The strength of wifi signal and speed may vary depending on your location and congestion in the area.

Installation of the Macaroon Portable Mobile Hotspot

The macaroon portable wifi is the masterly device for wifi network connectivity. It is a pocket device that can be carried anywhere and can enjoy its WiFi connectivity. But for this you have to install it. Whether you install the hotspot without any trouble then follow some steps. There are 2 methods of installing the hotspot.

Method 1: with USB cable
  • Primarily step, unbox the hotspot from the packaging box.
  • Power OFF the macaroon portable hotspot.
  • Take an USB cable, one end of the cable connects into the mobile hotspot’s LAN port.
  • Plug the other end of the USB cable into the mobile charging port.
  • Then, power ON the mobile hotspot and wait until the power LED lit up the green light.

Now the mobile hotspot of the macaroon is successfully installed.

Method 2: Without USB cable

If you install the mobile hotspot without hotspot then you readily install it. There are some of its steps which are as follows.

  • Power ON the macaroon hotspot and wait until the indicator light flashes.
  • Then, turn on the wifi on your mobile phone.
  • Here, the wifi list appears on the mobile screen and you select your wifi network name.
  • Afterwards, it asks the password then you type the password.
  • In the end, tab “connect”.

Now the macarron wifi hotspot is successfully installed. You enjoy the network connectivity and easily login the hotspot without any trouble.

Login steps of macaroon portable wifi hotspot

The macaroon hotspot provides ultra-fast wifi network connectivity. You use this device anywhere and enjoy the wifi network connectivity. If you want to login to the macaroon portable mobile hotspot without a hurdle then follow the given below steps.

  • Firstly, install the “UROCOMM App” from google play store or app store in your mobile phone.
  • Then, open the app and follow the prompt on screen instruction.
  • Here, display a login page on your mobile screen.
  • In the login page there are 2 text fields, username and password.
  • Presently, you type default username ID and secret password.
  • Lastly, you tab the section “log in”.

Now the login process of the macaroon wifi device triumphantly ends. These were some of its steps, which you can easily follow without any hitch.

Manual of the Macaroon Portable Mobile Hotspot

The macaroon wifi hotspot is the best device for home wifi network connectivity. This device can be used anywhere. The macaroon device is like a wifi router, because wifi router provides the wifi network connectivity. The router used in particular areas yet wifi hotspot used anywhere. If you want more details about the mobile hotspot then you need to read the macaroon wifi hotspot manual. Manual is that which comes with the hotspot device. All the information is there about the macaroon mobile hotspot. If you want to Setup the portable hotspot then you need to read the manual. But sometimes half and incomplete information is there in the manual. If you want to completely setup the hotspot then follow the given below steps.

Setup steps of the macaroon portable mobile hotspot

If you want to setup the wifi hotspot then it is unpretentious. Usually, every user easily setup the mobile hotspot with the app. It takes 2-3 minutes to setup the hotspot. If you want to setup the hotspot then you need to install the macaroon wifi app. There are some steps which are as follows.

  • The first and foremost steps, open the “google play store” and “app store” in your mobile phone.
  • Type the “UROCOMM” App in the search bar of the plate store or app store, and install the app.
    NOTE: You use the phone camera to scan the QR code for installing the app.
  • Here installing the app, open it.
  • Then, login the account with default username ID and password.
  • Presently, display an option “add device” then tab it. In a while, display a list of the device, then you select your mobile hotspot and add it.
  • Here, go to the setting and select the option “frequency band”. You easily change the band from 2.4 GHz to 5 GHz.
  • Now, You also change the wireless network name and hotspot password.
  • You select the security encryption WPA/ WPA2.
  • After these changes, in the end tabl “apply setting”.

Now the steps of the macaroon portable wifi setup ​is finished. You enjoy the wifi network connectivity and watch streaming 4K videos without any buffering.

Troubleshooting tips of macaroon portable mobile hotspot issue

The macaroon hotspot provides reliable wifi network connectivity. By which you enjoy internet connectivity. But sometimes macaroon wifi hotspot not working there are some issues. We easily resolve the issue manually with troubleshooting tips.

  • The wifi hotspot is not working, then you need to verify the power of the mobile hotspot is ON. If the device is ON but it is not working then you can power OFF the hotspot for 3-4 minutes and again power ON.
  • You need to check the power LED, if the power LED lit up red light then your device is not working, it needs the battery. If the power LED lit up green light, that means your hotspot is in a good position.
  • Sometimes the battery of the macaroon portable hotspot is low, so you need to charge the device.
  • Make sure the internet package of the hotspot sim is not finished.
  • Ensure more than 10 devices are not connected to the portable hotspot. If it connects more than 10 devices then it does not provide better internet connectivity.
  • Time-to-time you need to check the firmware update. If you use the old firmware then your device is not working properly.

In the eventually, follow all the tips above but your hotspot is not working, then you should reset the portable wifi hotspot.

Macaroon wifi review

The macaroon hotspot is wifi hotspot portable router 4G high speed pocket MIFI device. If you use the wifi network connectivity then you use the macaroon hotspot. It provides the wifi network anywhere. This device is a pocket device, you can easily carry anywhere and easily join the network, enjoy the wifi network. The macaroon hotspot has cloud virtual SIM technology that no sim needed. At a time it connects up to 10 devices and provides a stable connection. By which you enjoy streaming videos, gaming consoles and music without any loading and buffering. This device fulfils all the requirements of wifi networks. The macaroon hotspot has a 500mAh battery that runs up to 15 hours of continuous use. It works as a power bank to fast charge as compared to cell phones. That means the macaroon portable mobile hotspot is a tremendous hotspot for wifi network connectivity.

FAQs

Can I reset the macaroon portable wifi hotspot?

If you want to reset the hotspot then you can easily reset it with the WPS button. For this locate the reset button. Then, press and hold the reset button for 10-15 seconds. You use the paper clip to hold the button. Afterward release the button and hotspot LED flashes orange light that means reset is done.

How do I manually update the firmware of a macaroon hotspot?

To update the firmware of the macaroon portable hotspot then login the account of wifi hotspot. Go to the setting and select the option “firmware update”. Then, the tab “upgrade” section and firmware update process is started. You don’t turn off the device. After updating the firmware your device automatically reboot.

How many devices connect with the macaroon portable hotspot?

The macaroon device is a suitable device for wifi network connectivity. This device connects up to 10 devices and it gives stable connectivity to all the devices. By which you stream videos or surf without any buffering.

The macaroon portable hotspot battery backup?

The macaroon battery backup is 500mAh. It runs up to 15 hours of continuous use. It easily charges with the hotspot charger.

How do I connect my HP printer to my macaroon mobile hotspot?

To connect the printer to the hotpot, then open the control panel. And go to the network and internet. Here go to network connection and select the option “change adapter option”. Then, right click on wireless network connection” and go to properties. In the end, you click configure and then Advance.

Also Read:
Can iPhone Work As A Hotspot For Anki Vector?
VSVABEFV 4G LTE Router
Can Firestick Work on Public Wifi?
CasaTena Wireless Doorbell
Can The Amazon Tap Talking Work Without WiFi?