Netgear EX6400 WiFi extender

The Netgear EX6400 WiFi extender is a wall plug gadget that gives you a dual band speed of 1.9 Gbps. It repeats the signal to your home and offices with its internal antennas by connecting with a working WiFi signal. The robust mesh WiFi extender comes with features such as smart roaming. The Gigabit port allows you to join the wired connection for smart devices. You can join 35 different devices with the WiFi network. Experience a booster connection for streaming and gaming with a single network with FastLane technology. The WiFi extender is painless to set up. For the meticulous setup info, view it from below.

Netgear EX6400 WiFi Extender Setup(Hardware Installation)

Unpack your mesh extender parcel box and bring out the device, EX6400 manual, ethernet cords, and remaining add-ons. For the safety of your device and add-ons, put all these on a balanced(flat) and sere surface. Deem the Netgear AC1900 wifi mesh extender manual carefully. Once you deem the manual, go ahead to install the repeater. Before that, you must configure the WiFi box with the MAC address to operate with the repeater. When configured, you are good to go for the hardware installation.

  • For the initial setup, point your repeater beside the WiFi box.
  • Now, apply the electrical current to the repeater by putting it in the electrical socket. Remain quiet for the Netgear EX6400 solid green light to glow.
  • If the repeater does not light up still, thumb the power button as an alternate option to make it ON.
  • Now go ahead and connect with the WiFi network using two methods as stated below.

Netgear EX6400 Extender Setup

You can pair the extender with your WiFi box using the NIghthawk app, web browser, and its physical button, or you can say the WPS button.

Advertisement
Netgear AC1900 Extender Setup with Nighthawk App

You need a digital phone or tablet to access the NIghthawk app. Here are the straightforward steps you need to apply to conclude the Netgear AC1900 Nighthawk app setup.

  • ON your mobile application store, typify the Nighthawk app. Once you have found the app, install it on your WiFi device.
  • Open the WLAN settings on your device and join the network name with NETGEAR_EXT.
  • Next, go after the screen prompts to conclude the extender setup. After you are heading to do the installation one more time, shut off your repeater from the electrical jack and point to a new spot between the WiFi Box and the WiFi device. Keep translocating the repeater to a fresh spot until you observe the robust signal.
  • Join the repeater network one more time after translocating the extender.
Netgear AC1900 WiFi Range Extender (eEX6400) Setup with Web Browser

Before heading to set up the extender with a web browser, get sure your digital phone or laptop is set to detect an IP address. Make use of a laptop or digital phone to join the repeater network. If you are employing a PC, then make use of a network cord to join it to the extender. Now go ahead with the web browser setup.

  • First of all. launch any web crawler and typify the Netgear EX6400 default IP address 192.168.1.250 or mywifiext.net in the explore section.
  • The Netgear EX6400 WiFi Extender login window reveals. But if you are setting up for the initial time, the installation assistant may manifest.
  • Go after the screen info to accomplish the web browser setup.
  • When the setup is concluded, point your repeater to get the better signal stated above.
Netgear AC1900 Mesh WiFi Extender Setup with WPS

The WPS button will let you set up the EX6400 without installing the app and typing the passphrase. For the meticulous setup with WPS, go after the below info.

  • Clasp and thumb the WPS button on the Netgear EX6400.
  • Make use of the WPS button on the WiFi box to thumb it in within 120 seconds of pushing the WPS button on the EX6400 device.
  • The Netgear EX6400 extender lights solid green on the WPS LED light.
  • If the solid green light does not light up, then point your to the dead location viewing your WiFi box range.

Netgear Extender setup as an access point mode

You can set up the EX6400 in access point mode as well. Get sure the digital phone or laptop is set to detect an IP address from a DHCP server by itself. Here is the info to set up as an access point mode.

  • Firstly, set the repeater as an access point mode.
  • Apply the electrical current to the repeater by putting it in the electrical jack.
  • Stay for a PWR LED to glow green and then amber. This process could take 120 seconds.
  • Now conclude the setup using a WiFi connection or network cord connection. Next, you have to chase the web address mywifiext and obey the screen prompts.

Netgear EX6400 Login

After you conclude the setup, it will give access to change the extender settings by chasing the web management interface of your EX6400. Here are the login steps.

  • Open any web crawler and typify the Netgear EX6400 default IP address 192.168.1.250 or www.mywifiext.net in the explore section.
  • The Netgear EX6400 default login interface manifests.
  • Typify the admin username and passphrase and hit the login tab.

Netgear EX6400 WiFi Extender Firmware Update

The first thing you have to do is log in. You can view the detailed login process as steed above. Once done, hit the three horizontal lines to see the menu page. Next, pick the firmware update option and check whether the upgrade version is released yet. If not, then you apply the manual method to update it. For this, go after these painless steps as given below.

  • Head to the Netgear download center page first. Download the file in zip format to evade corrupt issues.
  • Login to your Netgear EX6400 extender and head to the firmware interface.
  • See the browser tab below the check symbol, click it.
  • Ferret out the file from your laptop and then upload it. The firmware update process begins. This process could assume your 5 to 10 minutes. It relies on your internet speed and laptop processor.

Netgear EX6400 wifi mesh extender troubleshooting

These troubleshooting guides will help you to get out from the issues if you are encountering any. Here are the steps to rectify the Netgear EX6400 WiFi Extender issues.

Netgear AC1900 not connecting?
  • If the Netgear EX6400 not connecting to WiFi, then you may have typified the incorrect passphrase. Probe the SSID and passphrase at the extender label. Get sure your WiFi box and the repeater are turned ON and it is furnishing the signal. Point your repeater at the exquisite spot to the WiFi box. If the extender client LED is red, then a connection is not good enough between the EX6400 and the WiFi box. Evade hindrances that may mitigate the signal like concrete walls, electronic appliances, glasses, etc.
  • If the Netgear EX6400 not connecting to mywifiext, then inspect the client LED in the EX6400 device. You can use the alternate option by using the IP address 192.168.1.250 for login or setup. If still not connecting, then it may be due to the web crawler cause. Clean the cache, cookies, and history of the web crawler. Try to switch to another web crawler instead of the old one. Otherwise, update your web crawler.
  • If the Netgear EX6400 not connecting to Nighthawk, get sure the device is joined to the network NETGER_EXT. You should have a recent version of the Nighthawk app that is released. Otherwise, update it. If still the issue exists, then clean the data and cache of the app or reinstall it after deleting the app.
  • Your extender firmware must be up to date in order to work in a normal manner. While updating, stay for a while and evade turning off all the devices you are utilizing such as EX6400 device, WiFi box, digital phone, or laptop.

Netgear EX6400 Factory reset

There are two ways to do the Netgear AC1900 factory reset. You can do it by its physical reset button and switching to the default settings with a web interface.

  • Chase the login page and typify the credentials you set up. Navigate to the menu tab in the web management and then the settings option. Later, proceed to click the other option under the settings. Click the reset button. A dialogue box manifest to verify your decision, hit yes. The EX6400 boots up by itself. Stay quiet until it boots up. It could assume your 5 to 10 minutes.
  • If the web management interface does not open, then use the reset button to switch to the default settings. For that, you must have a stick or identical tool. This tool is required to force into the reset gap on the EX6400 repeater. Free the tool after ten seconds. The PWR LED blinks randomly. After that, the EX6400 boots up and the PWR LED gets solid.

Netgear EX6400 WiFi Extender Review

A robust WiFi extender is mainly designed to repeat the signal to high density environments with its internal antennas. As it has the name AC1900, it gives you the best speed of 1.9 Gbps. A smart repeater gives access to use the internet with a network. Installation and setup barely assume your 10 minutes. It is not limited to a WPS setup. You can utilize a web crawler and app too. Overall, a good repeater for use. Highly recommended.