The Netgear wifi boosters are also dual-band range extenders that boost the existing network range devices. Thus, it helps to deliver 1200 Mbps of dual-band speed so that it simply can access all the corners of your house. Moreover, you can extend 2.4 GHz and 5 GHz wifi up to 1200 Mbps. Thus, it helps to reduce the interference between the wifi-enabled devices and the wireless extender. Along with that, it has FastLane Technology that simply uses both the bands to establish the super-fast connection which seems to be optimum for HD Streaming and online gaming. Sometimes, the Netgear WiFi Extender 5 GHz not Working or fails to detect the 5 GHz wireless network of the extender. Thus, it often loses the wifi connection.
How to change the wireless channel of the host router?
In order to change the wireless channel of the router when the Netgear WiFi Extender 5 GHz not Working. Follow the below-mentioned points.
- Well, the betimes connection to the 5 GHz wireless band can happen due to the indefinite placement of the extender with the wifi router. Simply, just move the Netgear range extender near to the host router.
- Therefore, complete the login steps to enter the web user interface for the range extender.
- After the successful login to the web user interfaces for the Netgear range extender, you need to click on the wireless button to access the wireless settings of the Netgear extender home page.
- Now search for the 5 GHz channel under the wireless network section.
- In this case, the Netgear extender is set to the auto mode and the channel set to 53-65 or 100-141 then immediately changes the channels to 37-49 or between 150-160.
- Changing the channels can fix the Netgear WiFi Extender 5 GHz not Working connections.
- Thus, click on the apply button and then reconnect the Netgear range extender to the 5 GHz band of the host router. Now you can check for the improved connectivity of the wifi devices.
- Now you can refresh the network connection and search for the network name in the available list of the wifi extender.
Why my Netgear wifi range extender does not connect to 5G?
The Netgear wireless extender acts as a bridge between the wifi-enabled devices or the wifi router. It simply connects to the outside range of the wifi signal. Moreover, it can connect to the existing wifi network and that network as well which is out of the network coverage range. But sometimes my Netgear wifi range extender does not connect to 5g and it starts lagging whenever I try to connect the extender to the 5G connection.
- You need to come to the Netgear extender closer to the wifi router. Thus, it will help to broadcast the wireless signal connection to the entire house. But sometimes the rebroadcasting of the wifi signal is not enough to cover the entire house. For that, you need to relocate the device near the host router. This is how you will avoid the weak signal.
- Be sure that the settings of the wireless extender and the router should match each other while you are configuring the device. If you failed to configure the settings of the Netgear extender in a proper way then my Netgear wifi range extender does not connect to 5g.
- Always stay the Netgear extender away from that device which creates a lot of network traffic. However, you can easily move or connect the device near the Netgear extender. So to connect the device with the host router by using a long-range Ethernet cable.
- Sometimes the 5G connection can also be disturbed or affected by the external devices in your apartment. However, these kinds of interruptions can disturb the connection between the wifi router and the extender.
The netgear wifi extender 5ghz works but not 2.4ghz. Why?
A 2.4 GHz networking band of the Netgear wifi extender ensures that you get stability in the wifi connectivity. It also provides you a broad area coverage with uncompromising speed into the network. On the other hand, 5 GHz provides you with the latest and superior technology that can cover multiple devices simultaneously. So that is why sometimes the Netgear wifi extender 5ghz works but not 2.4ghz. Try the troubleshooting suggestions that might help you to fix the error.
- Firstly, check for the settings and the compatibility with the router. Sometimes, the latest generation devices only support the 5 GHz compatibility. Thus it fails to connect with a 2.4 GHz connection. For other wifi-enabled devices, you can also ensure that the wifi network should not be restricted to 5 GHz so as to connect to laptops or mobile phones.
- Perform the resetting of the Netgear extender. With the resetting, it ensures that the host router does not have settings that can possibly bobble with the frequency that causes it not to work, Once these settings are set into default then it is good to go with the main wifi router.
- Moreover, you can also try to update the firmware of the Netgear normal extender. After the firmware update then you can retry to connect to the 2.4 GHz frequency channel. If these tricks do not work then the problem might be with the host router and you need to contact the technician.
Also Read:
Why is my 5g not connecting to Linksys extender?
My Netgear WiFi extender is not work?
Soxmuc 5G WiFi Extender
Orbi 5G NBK752 Mesh System
Netgear router firmware update not working