Netgear wifi extender device light not on

The Netgear WiFi Extender exaggerates the range of your mediocre router up to a wider location. It simultaneously covers the distance between your not internet having areas (including dead zones and long-distance areas). In addition, it enhances the signal quality and delivers better coverage by using this system. The Netgear extender setup via mywifiext is too simple and too easy in comparison to others. Moreover, you can establish the connection between your home router and extender very impeccably and easily. But sometimes, after the setup, the wifi light bulb, power light, router light, & the WPS light blinked very excellently but the Netgear wifi extender device light not on.

In this situation, you will have to just configure your home router and range extender network settings again. Surely, this is not configured correctly, as a result, this shows these types of errors. So, to fix this device issue, you will have to know the reason for this occurring issue. Generally, this issue will also not occur when this wireless router is not compatible with your home appliances. To resolve the light relevant issues, just reconnect all the devices like your router, extender, and other devices with the power. Also, configure the network settings of your home router and range extender correctly. Let’s get an elaborating guide to resolving the Netgear range extender device light issue with its reasons.

Why does the Netgear extender device light flash?

Particularly, the Netgear WiFi range extender devices light blinks to show the well-built connection between your extender and your diverse devices like mobile phones, computers, laptops, etc. Let’s know from below what device LED lights are shown.

  • When it blinks Solid Green signal light: This shows the impeccable and best WiFi connection between your range extender & numerous devices.
  • When the Netgear extender blinks the Solid amber light: Shows a good connection between your home devices and the range extender.
  • If the Netgear range extender flashes the solid red light: It shows the poor internet connectivity between your home range extender and several devices.
  • When the Netgear wifi extender device light not on: If this is not on, it’s off. This shows the no connection made between your home devices and the Netgear range extender.

Let’s know specific reasons when the Netgear wifi extender device light not on

These are the stipulations when the Netgear wireless extender device LED light has not flashed. All of the reasons are mentioned below.

  • This shows the error due to not losing the internet connection.
  • Not connecting your range extender with the power precisely.
  • Surely, your device is not compatible.
  • Your range extender is not placed in the perfect location.
  • You may not configure your smart networking range extender correctly.
  • In addition, your range extender is outdated.
  • The distance between your range extender and your device is too far.
  • In addition, the system does not flash the light, surely your range extender is not connecting yet with your router’s network.
  • It has no internet connection.

Let’s get a troubleshooting guide to fix the Netgear wifi extender device light not on error

The Netgear wifi range extender works according to your expectations. But, sometimes this shows errors like the Netgear extender device light is not flashing correctly. You may apply the below-mentioned amazing tricks to fix the errors of this networking range extender. Obtain all the steps below.

1. Connect your range extender with the power again

Here are the following steps to fix the device light not blinking error.

  • First and foremost, unplug this range extender, for a minute.
  • After a while, kindly unite this Netgear range extender with the power again.
  • Also, move your range extender from its current location, in case, if this is not getting the proper signal range in its current position.
  • After this, connect this system with the power again and verify the device’s signal light.
  • Surely, the device’s signal LED light has blinked correctly. If this is not fixed then you should follow the below-mentioned troubleshooting tip. This point definitely solves your device’s light relevant issues.
  • Also, verify all the wiring connections are correctly connected with the range extenders. Make sure your range extender intensively gets the proper signal range of your router.
  • Check that the internet connection of your mediocre router is working precisely, if not then kindly configure it first.
  • Moreover, you will try to again connect the internet connection of this range extender with devices.
  • Configure the internet settings of the Netgear range extender. Use the 2.4Ghz WiFi connection for away areas devices, apart from this, use the 5Ghz WiFi connection for closer located appliances.
  • Confirm the compatibility of your range extender with your all devices and use the compatible internet connection from 2.4Ghz or 5Ghz WiFi connection.
  • If the Netgear wifi extender device is not on, in this case, kindly reboot your long range router.
  • To fix the device light error, just reset your Netgear range extender and also your device after rebooting it. You may reset your range extender in two effective ways: one is factory reset (via the web interface settings) and another is to reset it normally using the reset button.

Also Read:
My Netgear WiFi extender is not work
Fixed! Netgear wifi extender not showing up
Netgear router firmware update not working? IP address
What is Netgear extender IP address after setup?