Smarthome Select Mailbox Reminder
The Smarthome Select Mailbox Reminder is the mail alert system. When the postman opens your home mailbox and then, immediately rings the alarm for alerting. The wireless remainder is an audible device. This device blinks the light while ringing the sound. The smart home mailbox alarm has wireless communication and a wireless connection range of up to 300 feet. This device provides you with a powerful reminder with the sensor. For the functioning of the sensors, you need to put the cell into the sensor. It makes your life easy because you cannot miss any mail with this reminder. It reminds you very quickly.
This is a smart and home automation device. The sensors of this device have a wired antenna. It is very easy to install this, you just place, connect to the adapter and plug it. You can fix this device in any mailbox, it works with all. This device has an audible and visual mail alert.
Elementary Smarthome Select Mailbox Reminder Features
There are various features of this wireless mailbox alarm.
The device is working with the wifi connection for the sensor and receiver. This device’s coverage is 300 feet.
This device reliably works with approximately all standard mailboxes. You can fix this in any mailbox.
The power source of the receiver is electricity and the sensor source is the battery. You need to connect the 6V DC supplier with the receiver.
This reminder provides a powerful alert with a visual and audible smart home mailbox alert for informing.
Easy to install
It is very easy to fix the sensor with the double-sided high temperature 3M adhesive strips. Then, insert the battery in this for working.
Finest Method to Smarthome Select Mailbox Reminder Setup
The impeccable setup of the device is very necessary for errorless functioning. Follow these steps to set up your wireless reminder device.
These are the things needed to complete the setup.
- Receiver unit.
- 6V DC power adapter.
- Instruction manual.
- Sensor unit with mounting velcro.
- Sensor 2x AAA batteries, you need to buy this separately.
Initial Setup of Senor
- Open the sensor back door
- Take the two AAA batteries to insert into the battery place.
- Check the + and – sign then, insert the battery according to these signs.
- After that, close the back door of the sensor.
Setup of Mailbox Reminder
- Initially, open the mailbox of your home and clean the mailbox door with a dry cloth.
- Then, peel off the protected film of velcro on the sensor unit.
- Fix the smart mailbox sensor unit on the mailbox door.
- Also, set the sensor wire antennas.
- Next, turn ON the sensor from the power button.
- Close the back mailbox door.
- After that, attach the DC power adapter to the DC port of the receiver unit.
- Then, choose the location of the receiver away from the water things and electric gadgets and near the plug.
- Plug the power adapter into the working electric socket.
- It is ready for use and the setup of the device is completed.
NOTE: when you receive the mail from the mailbox. So, reset button use is important for Stopping LED indicator.
Setup your wireless mailbox alarm with these steps.
Smarthome Select Mailbox Reminder Manual
To begin with, I will discuss the consumer’s questions in this manual about this device. Can it work with Alexa? Can it catch other reminder frequencies? How much is the range area of this wireless mailbox reminder? Why is it mandatory to press the reset button after taking mail from the box? What are the volts required? Does it work with multiple receivers? Is this sensor waterproof? Does it work with a heavy mailbox door? Can it work at a cold temperature?
Can I connect it with the wire? Is the sensor battery given with the device? Can I control it with the app? Is it necessary to buy a sensor battery separately? Can it work in the rain? If any information is not available in this. So, take more instructions and information from there.
Best Smarthome Select Mailbox Reminder troubleshooting tips
With this wireless mailbox reminder, you are facing any difficulty. So, read upcoming paragraphs for solving issues and do not miss any point or do not press any button during the process.
Reset the button after receiving mail
If your device blinks light continuously and it does not. The reason for this problem is you do not press the reset button after receiving the mail from the box. So push the reset button to stop the blinking of light. Press the reset button and hold it till the LED light stops blinking. After that, Your device light stops blinking and presses the reset button after receiving the mail.
Check the receiver location
When the mailbox door is opened or your device does not produce sound because the receiver is not located in the sensor coverage. So, check the wireless mailbox reminder location. In the 300 feet area, locate your reminder. After placing it at the right location, test your reminder that is working.
The reminder receiver is not working or not showing at any time. What can I do?
First, again check the wireless mailbox location and if the location is right. Then, check the electric socket is supplying power or not. Try to plug your receiver into another outlet. Then, it is working so, the problem is in the previous switch and repairing it.
Follow these troubleshooting steps for taking different solutions.
Smarthome Select Mailbox Reminder Review
This device is fixed in the mail and for alerting. I saw this device in the home of neighbors. Then, I planned to purchase this reminder. After 2 days, I ordered it from amazon. After receiving it from the delivery box, it read all envelopes and set them up within 30 minutes. It is the
best smart home device. You cannot miss any mail from the box. When the mailbox door is opened it immediately produces a sound for alerting the mail. I advised this device to many people.
Wireless smart-home mail reminder features:
The features of this reminder are the power source, powerful alert, easy to install, universal compatibility, wireless communication.
Smart home mailbox 74771 reminder design:
The design of this device is very small and you can place it anywhere in the home and on walls as well. You need to place it where you heard this device sound easily.
Dimensions of the wireless mailbox reminder:
The wireless mailbox reminder is 7 x 2.5 x 9 inches.
Smart home mailbox 74771 reminder specification:
The Smarthome is manufactured and the special feature is easy to install. This device is used in Commercial/Residential. 5.6 ounces is the weight of this device. 20 October 2011 is the first availability date of this reminder.
Wireless smart-home mail reminder price:
The latest price of this mail alert is $58.99
Why is it mandatory to press the reset button after taking mail from the box?
The pressing reset button is important to stop blinking the reminder light.
What are the volts required?
110 volts power is required.
Is the sensor battery given with the device?
No. You need to buy it separately.
Can it catch other reminder frequencies?
Can it work in the rain?
Can it work at a cold temperature?
Can I connect it with the wire?
It connects only with a power cord.
Does it work with a heavy mailbox door?
Yes, it works with all mailboxes.
Can I control it with the app?
Is it necessary to buy a sensor battery separately?
Does it work with multiple receivers?
I think yes.
Is this sensor waterproof?
I do not know about this.