The Netgear range extender is the best wireless extender that connects to the modem or router and extends the wifi connection all over the house. Moreover, you don’t need to spend money on buying a new router in order to elongate the internet connection. The main advantage of having the Netgear wifi extender is that it can easily connect to the existing routers in your house. But if you are an Apple router user and failed to connect the TV to the Netgear extender with Apple router then you need to read this article. In this article, you will get information so that you can experience a smooth wifi connection without any kind of interruption. Just follow the step that is discussed below and solve your problem.
You need to determine to connect to a wifi connection
Before you start using the Netgear mesh extender internet connection, you must learn how to connect to a wifi connection. Ensure that the TV should not be connected by using an Ethernet cable. In case, if you use the Ethernet cable then you will not be able to catch or see the options to connect to the wifi connection. That is why it is recommended to use the wifi network instead of using the Ethernet cable connection. For that, go to the settings of the Netgear extender with the Apple router and then click on the Network button. If you are using an old third-generation Apple router then go to the settings and click on the general button and then select the network. There you need to choose an agreeable wifi network to connect to a TV.
The problem arises when you want to use the Ethernet cable to your TV but are unable to do so. So let’s resolve this problem. Firstly, unplug the Ethernet cable from the TV and then wait for a few minutes to wait for the Apple router that will notify you when it connects to the internet connection.
Verify that everything is working fine, into range, and properly connected
To connect to the TV, be sure that the Apple router is properly connected to the Netgear extender and both are powered on. In case, the Apple router or the Netgear extender is working simultaneously then it is required that they should be on at the same time. If it is possible then you need to place the Apple router and the TV into the same room so they can be hassle-freely connected to each other. Also, try to keep the Apple router or the extender away from the obstructions that threaten its wireless signal specifically from the metal surfaces.
You can also restart your TV or the Apple router
Well, you can restart your TV or the Apple router or the Netgear extender as well, if they fail to connect to each other. Also, you need to change into various settings and for that, go to its settings and then select the system and click on the restart button. In case, you use the third-generation Apple wifi router then firstly go to its settings then click on the general section then you need to click on the restart button.
Check for the firmware update or if require the use the Ethernet cable
Well, you can check for the firmware upgrade of the Apple router, and if required then use the Ethernet cable to connect to the TV. If the direct wifi connection does not work then you can use it to connect to the Apple TV. If you wish then you can also use a DSL or cable modem instead of using the Ethernet cable and then connect to the TV. When you use the Ethernet cable to join a safe connection with the Apple router and the TV, then the TV will automatically connect to that network instead of connecting to the wifi network.
After joining the network connection of the Apple router, it must check for the software upgrade of the router or the extender. In case, if any of the updates are available from any of them then immediately upgrade the Apple router or the Netgear extender so that you can enjoy your favorite show on TV without lagging or the disturbance of the dead wifi zones.