Are you looking for an affordable but high-quality projector for a home theatre? VANKYO Leisure 3 Mini Projector is a good choice. The high-definition projector has become the favorite of many. With this, you can expect to enjoy a superior watching experience. The size of the projector makes sure it is portable. It comes with a 1 warranty and is perfect for use at home. Just put it on a table, connect it to the device you are going to play the video from, and start enjoying. The setup process only takes a few minutes and the picture quality is exceptional. It offers more than what you expect. In this article, you are going to learn all that is to know about VANKYO Leisure 3 Projector.
Specifications of VANKYO Leisure 3 Mini Projector
Here are the features and specifications of the VANKYO Leisure Projector that makes it stand out from others.
- It has an LCD display and an LED light source.
- The projector’s resolution is 800×400.
- It comes with a 2Wx2 speaker. One is present at the bottom of Leisure.
- It has HD, USB, VGA, Audio Out, and AV In ports along with a micro SD card slot.
- The projector has an innovative cooling system that enables heat dispersion. It is also equipped with noise suppression technology that cuts down the fan sound in half.
- Its built-in speaker provides an amazing viewing experience.
- The pictures of the projector have +60% brightness.
- With HDMI input, it can freely stream multimedia content like video games, TV sticks, etc.
- The projector is powered by an MStar Advanced Color Engine.
- It is 1080p HD supported and 2000:1 contrast.
How to Setup and Install VANKYO Leisure 3 Mini Projector?
Setting up the Vankyo projector is no hassle at all and it is only going to take a few minutes. Here’s how you have to do it.
1. Options for Installing the Projector
Based on how you have placed the projector, you might have to change the orientation of the projected image. This ensures that the projected image can be viewed by the audience. In case your project from the rear or ceiling, just go to ‘Menu’, then ‘OPTION’, and then ‘Projection Mode’ for setting up the projection modes.
There are 4 different installation types. Let’s take a look at them.
- Front Table: In this mode, the projector has to be placed in front of the screen or wall. This will directly project the image to the screen or wall.
- Rear Table: In this mode, the projector is positioned behind a compatible screen that supports rear projection.
- Rear Ceiling: In this, the projector is positioned behind the screen with the lens facing upside down. The mode will let you flip over the image. A compatible screen supporting rear projection is needed.
- Front Ceiling: This flips the image over from the top to bottom for projecting upside-down from a wall mount or ceiling.
Important Note: No matter where you are setting up the projector, check to place it squarely in front of the middle of the wall or screen and not an angle if you can.
2. Distance and Size of Projection
The distance of the projector from the screen decides the image size. If it is farther away from the screen, the projection size increases. So, place the projector at an appropriate angle. Thereafter, just adjust the keynote and the focus ring manually to get the best image.
90 inches is the recommended screen projection with a projection distance of 9.84 feet. Ambient darkness helps in improving the clarity of the images that are projected.
3. Settings of the Projector
Use the ‘Menu’ system of the projector for adjusting the settings to control the projector function.
But here are a few tips that you need to keep in mind.
- Press the Up and Down button for selecting the option you would prefer changing. Thereafter, click on ‘OK’ for entering the submenu.
- As soon as you are done changing the settings, hit on the ‘Menu’ button to go back to the previous menu’. To exit and go back to the homepage, press ‘Back’.
4. Picture Settings
Use the projector’s or remote’s ‘Menu’ button to enter ‘PICTURE’ settings.
Picture Mode: This will let you choose from different image modes such as ‘Vivid’, ‘User’, ‘Soft’, and ‘Standard’ for various projected content’. You can set up the ‘Color’, ‘Brightness’, ‘Sharpness’, ‘Tint’, and ‘Contrast’ if you choose the ‘User’ mode.
Color Temperature: This lets you choose the color temperature modes. The available options are ‘Cool’, ‘User’, ‘Warm’, and ‘Medium’. You can choose the color proportions of ‘Blue’, ‘Red’, and ‘Green’ for the images after you have chosen ‘User’ mode. Reduce Display Size: It can reduce the image size proportionally, from 100% to 75%.
Aspect Ratio:
This is the proportional relationship between the height and width of the image. The options available are ‘Auto’, 16:9, and 4:3.
PC Screen:
It is a function that gets activated if you choose VGA as the input source. Press on ‘OK’ for entering the screen setting and adjusting the desktop as per your preference.
Noise Reduction:
It is the process of removing noise from the signal. The available options are ‘Default’, ‘High’, ‘Middle’, ‘Low’, and ‘Off’.
5. Option Settings
Use the Left or Right button to get to the ‘OPTION’ Settings. This will show you the options,
- Restore Factory Default: This is reset the projector. After reset, it will automatically reboot.
- OSD Language: For setting up the operation interface language.
- Projection Mode: This comes with 4 different modes such as ‘Rear Ceiling’, ‘Front Ceiling’, ‘Rear Table’, and ‘Front Table’.
- Software Update: It will update the projector’s software if a new version is available on the USB drive that is attached to the projector.
- OSD Duration: It adjusts the duration of the Menu appearing on screen after the last button is pressed on the projector’s remote.
6. Sound Settings
Use the Left and Right button for getting access to ‘Sound’ settings. This will give you the following options.
- Sound Mode: This sets up a different sound pattern for video and audio files. The options are User, Sports, Movie, Music, and Standard.’
- Auto Volume: It is to set the volume as per your preference.
- Balance: It balances the sound of the speaker’s right and left channel.
7. Projector Connections
If you are connecting a device to the projector, the following steps have to be followed if you are doing it for the first time.
- Connect the power cord into the power inlet of the projector and then plug it into a power outlet.
- Take off the lens cover and then press the projector’s power button to turn it on. You can also use the remote.
- Go to the OSD Language interface to set the language you prefer
- Use UP/Down/Right/Left buttons for choosing your language. Thereafter press the projector’s or remote’s OK button to confirm.
- This is going to show a screen with ‘No Signal’. Put in the cables or device into the respective ports of the projector.
- To go to the Input Source menu, press on ‘Source’.
- Now, press on the Source button or the ‘Up/Down’ button for selecting and then pressing on the ‘OK’ button for choosing the right input.
- Adjust the keystone and focus ring to get the best possible image.
Notes
- After plugging the power cord into the inlet, the LED light is going to flash green/red and gradually it is going to change to solid red. Use the Power Button to turn on your projector. Now, the projector LED light will turn to green.
- You should not look into the projector lens if the lamp is on as it can damage your eyes. It is particularly dangerous for kids.
- Put in 2 AAA batteries in the remote prior to using it.
If you are using the projector in a conference room and want to project videos, music, slides, etc. connect it to the computer.
a. Use HD Cable
An HDMI connection is better for projecting videos, images, and other files that have to be HDMI.
- Turn on the projector and the computer.
- Next, connect the HD cable to the HDMI port of the computer.
- Now, take the other end and connect it to the HD port of the projector.
- Press on the button ‘Source’ for opening the Input Source menu.
- Choose HDMI for projecting a file on the computer and pressing the Up/Down button.
b. Using VGA Computer Cable
- Turn on the projector and the computer.
- Next, you have to connect the VGA cable to the VGA port of the computer.
- Take the other end of the cable and connect it to the projector.
- Press on the button Source for opening the Input Source.
- Choose VGA for projecting a file on the computer simply by pressing on the Up/Down button.
Note:
For connecting Mac that includes just a Mini Display Port, Mini-DVI port, and Thunderbolt port, you have to get an adapter that will let you connect to the VGA or HDMI port of the projector.
For Windows7 and higher, press the Windows + P key simultaneously will open the display-switch toolbar with different display options. these are,
- Duplicate: The option will display the contents on the computer screen.
- PC Screen: It displays the computer screen contents on the computer screen.
- Projector Only: It displays the presentation content on the projector but will show a blank screen on the computer.
- Extend: It is an option that splits the image between the projector and the computer.
For Mac, go to Apple Menu and then System Preference. From this, go to Display and then the Arrangement tab for checking and unchecking. The Mirror Display box can extend or mirror the content for your projection screen.
How to do a Factory Reset on VANKYO Leisure 3 Mini Projector?
Want to do a factory reset on the projector? Follow these easy steps.
- Press the Left/Right button for opening ‘Option’
- Now use the Down button for selecting the ‘Restore Factory Default’. Thereafter, press ‘OK’.
This will reset the projector’s settings.
FAQ
Why is the Vankyo leisure projector display available without the audio?
There are only the projector display and no audio because of one of the following reasons.
- The projector or the device that is connected such as the TV or PC is muted.
- The audio format isn’t supported by the projector.
- VGA connection transmits an analog signal of video and not audio. So, you will have to use an external speaker to TV or PC to get the audio.
Why does the leisure 3 projector have audio but no picture?
The projector might have audio but no video may be because the video format isn’t supported by the projector.
What to do If the Image is Upside Down on Vankyo 3 projector?
Enter the Menu-Option-Projection Mode for flipping the projected image accordingly.
What to Do is the Projection Screen isn’t Square-On to the Projector Aligned Horizontally?
If the projector screen isn’t square-on to the projector aligned horizontally,
- Check if the projector has been placed on the surface with a light at the center of the screen.
- Check if the screen has been placed perpendicularly to the projector.
What to Do If the Remote Control isn’t Responding?
In case the remote control is unresponsive, you will have to follow these steps.
- Check if the remote points at the IR receiver directly
- Don’t cover the IR receiver
- Put on a new pair of AAA batteries
What to Do If the Color Gets Distorted?
In case the color gets distorted, you will have to take the following steps.
- Check if the video source has a fine resolution
- Go to Menu-Picture-Color Temperature for choosing the different modes and adjusting the values.
- Go to Menu-Option-Restore Factory Default for doing a factory reset.
Why is the Vankyo 3 Projector Screen Showing No Signal?
If VANKYO Leisure 3 Mini Projector screen is showing NO signal, you need to do the following,
- Check if all the cables have been plugged in firmly and correctly.
- Check if you have chosen the right input source. For instance, in case a USB drive has been plugged into the projector, choose the USB in the interface of the input source.
- The projector supports USB 2.0 disk. In case a USB 3.0 is connected, it can slow down ‘No Signal’.
What if the Images Become Distorted or Blurry?
In case the images appear distorted or blurry, do the following.
- Adjust the keystone and the focus ring until you get the best image.
- Place the projector on a flat-screen surface which is level, side-to-side, as well as front-to-back. An inclination of an angle is going to blur the displays or cause uneven colors.
- Ambient darkness improves the clarity of the images that are projected.
- The distance range between the screen and the projector is from 1.19m to 5.46m.
- Projecting screen or wall is as clear-white as possible.
Why does the Vankyo Projector Get Shut Down While Playback?
Is your projector getting shut down while you are playing the video? you will have to do the following to fix it.
• Check if the power plug is working and fitted firmly to the outlet.
• The projector activates the built-in protection automatically. This turns it off in case it gets overheated. So, unplug it and let it cool down before you use it once again.
• In case the LED light indicator on the projector lights up but the fan isn’t operating, get in touch with the support team of VANKYO.
• Using a large memory device such as a 1TB disk drive on the USB port might shut down the projector. Try to insert the USB device prior to powering the projector. You might have to use an external power supply for your storage device.
What to Do If There are Small Dots on the Vankyo 3 Projector?
In case there are small dots on the projector, here’s what you have to do,
• Tap the projector lightly for shaking off the dust that can get collected during shipping or installing
• Avoid using chemical cleaners on the lens.
How to Change the Language?
For changing the language, press the ‘Menu’ button for entering the OPTION-OSD Language interface for choosing your preferred language.
How to Connect the leisure 3 Projector with a Mobile Device?
To connect the projector to the mobile device, you will have to follow a few simple steps. You can connect the projector to your mobile devices such as a tablet or smartphone.
An additional HDMI adapter is needed to connect the projector to the mobile device.
To connect the projector to an iOS device, follow the steps given below.
a. Turn on the iOS device and the projector.
b. Plug the HDMI connector of the HDMI adapter to your VANKYO projector.
c. Plugin the USB connector of the HDMI adapter to the power source.
d. Now, put in the HDMI adapter’s lightning connector to the iOS device.
e. Press on the ‘Source’ button to open the ‘Input Source’ interface.
f. Press the Up/Down button for selecting HDMI. Choose Trust in case there is a pop-up window on the iOS device.
To connect the projector to an Android device, here are the steps you need to follow.
a. Switch on the Android device and your projector.
b. Now, plug in the HDMI connector present on the HDMI adapter to your projector.
c. Plugin the USB connector to the HDMI adapter to the power outlet.
d. Put in the Micro USB or Type-C connector on the HDMI adapter to the Android device.
e. Press on the ‘Source’ button to open the ‘Input Source’ interface.
f. Press the Up/Down button for choosing HDMI for projecting the files on the Android device to the screen or the wall.
Note
For projecting the content on the Android device successfully, you might have to look for the ‘Developer Options’ for turning on ‘USB debugging’. You can check it on the internet.
Some Android devices might only transfer the display without audio because of the protocol restrictions. You can switch over to some other connecting options for projecting in this situation.
To connect the projector to the MHL device, do the following.
a. Turn on the MHL compatible device and your projector.
b. Plugin the HDMI connector of your MHL cable to the projector.
c. Power your MHL cable by plugging in the USB-A connector to the power adapter or power bank and then insert it in the socket.
d. Hold the ‘Source’ button to open the ‘Input Source’ interface.
e. Press on the Up/Down button for choosing HDMI for projecting the files on the MHL compatible device to the screen or wall.
How to Connect the Vankyo 3 Projector with the DVD Player?
To connect the projector to the DVD player ad watch movies, use the AV cable provided in the package. Thereafter, follow the steps given below.
- Turn on the projector and the DVD player.
- Now, connect the yellow jack plug to the projector’s AV port.
- Next, you will have to connect the yellow, white, and red RCA connectors to the DVD player.
- Hold the ‘Source’ button for bringing up the ‘Input Source’ menu and choose AV by pressing the button ‘OK’ on your remote.
How to Connect a Fire TV Stick to the Vankyo 3 Projector?
Do you want to watch a movie using a fire TV stick and projector? Just follow the instructions listed below.
- Turn on the projector
- Plugin the HDMI connector present on the fire TV stick into the projector’s HD port.
- Put in one end of the USB cable to the fire TV stick’s USB port. When done, plug the other end to a socket.
- Hold the ‘Source’ button for opening the ‘Input Source’ menu and choosing HDMI by pressing on the option ‘OK’ the remote.
When the fire TV stick has been connected to your projector, use the remote of the fire TV stick.
How to Connect the Vankyo 3 leisure Projector to a Chromecast?
To watch movies using Chromecast and the projector, you have to follow the step-by-step instructions given below.
- Switch on the projector.
- Now, plug in the HDMI connector on Chromecast to the projector’s HD port.
- Put in one end of the USB cable to the Chromecast’s USB port. Thereafter, plug in the projector to a socket.
- Use the ‘Source’ button for opening the ‘Input Source’ menu. From the menu, select HDMI simply by pressing on the remote’s OK.
- Now, download Google Home and install it on your handheld device.
- Set up the Google Home app by following the instructions.
- When you are done, choose any video player on your handheld device to play a video. Then tap on the Chromecast icon to cast the video on the screen or wall.
VANKYO Leisure 3 Mini Projector Review
Looking at what people have to say VANKYO Leisure 3 Mini Projector is one of the most popular projectors in the market. 90% of the people have to say all the positive things about it. One of the primary strengths of the projector is it has an LED light engine that can last thousands of hours. Moreover, it comes with a built-in stereo speaker and each of them are powered by 2 watts. This is a good addition but an outboard speaker sounds much better.
The native resolution of the projector is just 800×400. However, it accepts 1080p and while playing the video it will downscale it. It can fill screens in a wide range of sizes from 32 to 172 inches and a distance of 4.9 to 16.4 inches. However, the projector doesn’t have a zoom function. Hence, the image size is control of the projector distance from the screen.
Its USB port gives power and this is just perfect for streaming dongles like Roku or Fire TV Stick.
It doesn’t come as a surprise that the VANKYO Leisure 3 Mini Projector doesn’t offer lens shift. Hence, the placement can be a little inflexible. All in all, it is a good projector within this range.
Also Read:
Au King Mini Projector 2021 Upgraded portable Video projector
ViewSonic M1 LED Projector
TMY V08 Projector troubleshooting guide
KODAK LUMA 350