Right now, the YomGz WiFi Repeater is launched by the YomGz manufacturer. It was released on October 22, 2021. Exclusively, this YomGz WiFi Extender extends the signal range of the current device. It covers up to 3500 sq.ft and connects your mediocre router internet to more than 30 devices. The WIFi signal booster has a responsive device that easily amplifies the internet range. It is the best wireless signal booster for the home. It teems with the qualities of the advanced features. The YomGZ 1200Mbps Dual Band WiFi Repeater is not too choppy and spendthrift.
Is your router not covering dead zones? In this case, you can use the YomGz WiFi extender. You can buy the WiFi booster from Amazon, BestBuy, eBay, Walmart, etc., with its exact amount. Before buying the device, you must check the YomGz WIFi Extender Review. The performance of the WiFi signal is great and most compelling. It gives the 1200Mbps WiFi high-speed connection. The WiFi signal booster has 4 signal antennas which give high-speed penetration with the dual-band signal strength. You can acquire the impeccably signal range of your existing router through the 1200Mbps Dual Band WiFi Repeater.
Following are the YomGz WiFi Repeater features
Natively, the YomGz Wireless Extender is a vital extender that extends the network signal strength of the existing device. Here are the following features of the YomGz 1200Mbps WiFi Repeater.
1. 1200Mbps High data Transmission speed
The WiFi Extender offers the dual-band data signal range. One is 2.4Ghz and another is 5Ghz. As a result, it throughput the strong and reliable signal range. It also facilitates lag time and buffering while streaming HD videos, movies and connecting its network with your computer or laptop.
2. Compatible extender with 99% routers
The YomGz WiFi signal booster almost works with every standard gateway and access point. It can boost its network to any devices like iPhones, iOS, smart plugs, Samsung devices, Android devices, PCs, Echo/Alexa devices, PlayStation, etc., so much more. It is quintessential for the gaming experience & HD streaming.
3. Banish all dead zones
The WiFi extender gives a better signal range up to 3500 square feet. It has a 4 high gain external antenna that moves the internet up to 360 degrees.
4. Easy setup
The YomGz WiFi signal booster installation process is the main breeze. You can set it up; the booster takes 30 seconds to the YomGz setup. In addition, it’s installed in 5 seconds. Keep holding the WiFi Extender and Router WPS button for a while. After that, you might initiate the extender in an operating mode in less than 1 minute.
5. Multi-Secure Connection
The WiFi extender can maximize network security. After enabling the end-to-end encryption, you can ensure network safety. It prevents unauthorized internet access, embezzling your net, and securing vital data. It’s well suited for choppy online media usage and large home available multiple devices.
Steps for the YomGz 1200Mbps WiFi Repeater Installation
Generally, the WiFi booster installation process is the main breeze to using the device’s extended internet. You can install the device by following the below-given points.
- Unbox it if it is new.
- Take out from the packaging box YomGz extender accessories.
- Pick a space in your home which is ventilating for the extender.
- Plug it into an electric wall outlet and ensure the extender is not far from the router.
- The space between your router and extender is the same.
- Ensure the router is working.
- Press your extender power button.
- Wait, the YomGz extender power signal light of the extender has flashed.
- Now, connect your extender with your router.
Connect the YomGz WiFi Extender with the Router
Here are the following steps to connect the YomGz WiFi signal booster with the existing device network.
- Ensure the wireless signal booster is perfectly connected with the power.
- After this, press your extender and router WPS button.
- Keep holding it for three to five seconds.
- It generates an internet connection between your extenders.
- It may take a few seconds to finish the process.
- So, you will wait until the internet signal light has not flashed.
- When the internet light flashes, that means it begins working.
- You can now use the extended Wi-Fi of the extender on your various devices.
YomGz wireless signal booster setup with Mobile phone
Follow the below-given steps to the YomGz WiFi repeater set up with the mobile phone; it is such as:
- Unlock your mobile phone and go to the home settings.
- Under the home settings, locate the network & internet settings.
- Tap on it and turn on the WiFi.
- Wait, on your mobile phone, Wi-Fi settings manifest the name of too many available network devices.
- You have to click on the one from 5Ghz xxx and the 2.4Ghz xxx.
- It connects your mobile phone with the extended internet, but the YomGz extender has no internet.
Solves the YomGz extender no internet issue
You will resolve it by applying the following settings, it is followed as:
YomGz WiFi Repeater login
- Ensures your mobile phone is connected to the internet.
- Launch a browser to get rid of the issue if you wish to cope with the YomGz wifi repeater with no internet issue.
- Find the YomGz Repeater login IP address in the URL.
- Wait for a minute; the YomGz extender admin panel manifests on your mobile screen.
- While its login box appears, you will enter the YomGz extender admin name and password.
- The YomGz WIFi extender login username and password help you access the YomGz wifi Repeater login.
- So, enter both the credentials correctly and do not make any typos.
In the end, finish the YomGz extender login process.
Access the YomGz wifi range extender management page
Here are the following steps to access the YomGz extender setup, it is such as:
- First, access the YomGz wifi range extender management page.
- You will designate the YomGz Extender Setting (it helps you to amplify the signal range of your host WiFi network through the wall.)
- You will choose the one mode from the access point mode and Repeater mode.
- If it does not show the mode, then set it up manually.
- Wait for a second; your mobile phone is now browsing the YomGz access point.
- You will enter the router connection default password and the same SSID.
- Click on the next option if you wish to change the password and username
- click on the YomGz extender to change the password and username.
- Change it and finish the YomGz extender setup.
- Finish the YomGz repeater mode settings. The range extender relay has been completed.
Now, the YomGz 1200Mbps WiFi Repeater Setup process is successfully ending. You can now use the WiFi password of the device to connect the device network.
Following steps for the YomGz wireless extender setup with PC
You should set up the YomGz wireless signal repeater settings by following the below-mentioned steps. It is such as:
- Connect your Pc with a power supply.
- Locate device network name and password from the network settings.
- If the YomGz extender has no internet connection, go on the browser and log in.
- While you search its Ip on the browser, the yellow YomGz wireless repeater admin panel immediately appears on the screen.
- Login to the range extender first perfectly, and after this, manage the settings of the YomGz range extender.
- Now, follow the on-screen instructions and set up the network settings.
- Apply it in the end to save all making changes in the YomGz extender.
Tips for YomGz Wi-Fi Extender Troubleshooting
Once in a while, the YomGz Wi-Fi Range Extender manifests the errors that are set up incorrectly and other pertinent causing facts. To cope with all the device issues, you can resolve them using these troubleshooting points.
- The> YomGz extender 5Ghz not working ever so due to misconfiguration. You can configure the device settings again. Modify the password, and connect the 5Ghz band network only with a few devices. Ensure the issue is resolved.
- When the YomGz extender has no signal light and the extender does not show in the WiFi list. You can reposition your wireless signal booster. Connect it again with the router internet and check its network signal light again; it is blinking now.
- The YomGz wifi extender does not work
once in a while. In this case, you should reboot the wireless signal repeater. Ensure that it works great after rebooting the power. - You should reconnect the 2.4Ghz band network if, in a while, the YomGz extender 2.4Ghz is not working. Check again and get a reliable connection via the 2.4Ghz Wi-Fi connection.
- If the YomGz repeater mode is not working, you will reconfigure the repeater mode settings. Henceforth, if it’s not fixed, then reset your wireless range extender.
- If the YomGz repeater is not working after the reset, in this case, you might update the YomGz extender firmware. Surely, these tips help you with the YomeGz Wi-Fi Extender troubleshooting.
Thus, follow the above-given points to cope with the issues of the YomGz wireless signal booster. These YomGz WiFi Repeater troubleshooting tips will help you to fix the errors.
Steps to the YomGz extender firmware update
Here are the following steps to update the YomGz wireless signal booster firmware update, it is such as:
- Launch the browser after taking the YomGz dual-band wifi extender with 2.4ghz and 5 GHz support.
- You will log in to the YomGz wifi extender with the correct details.
- Once you log in, the YomGz web management page appears on your computer screen.
- Find the support option under the settings.
- Follow the on-screen instructions to update the YomGz extender.
Update the YomGz WIFi range extender with its latest version.
YomGz WiFi Repeater Review
The YomGz wireless signal booster repeater extends the signal range of the existing host network with better performance. This YomGz wi-fi extender 2.4Ghz band network transmits the 300Mbps connection. Apart from this, the YomGz wireless repeater 5Ghz wireless connection transmits the 867Mbps data transmission rate. You can easily take the extended network of the range extender with the WPS button. Firstly, set the WPS settings of the range extender; once it is set up then set the repeater mode, and it automatically allows extending the network. Thus, you can have a better experience using the YomGz wireless extender network. In any case, the YomGz wireless repeater flashes the yellow color light; you should keep your signal booster closer to the router. Apart from this, the all overworking of the range extender is almost great and exclusive. You can easily use it and set it up within a minute.
Also Read:
Whew Wi-Fi Extender setup troubleshooting review
Can I make a secure WiFi connection with the CHNFUWEI 1200Mbps WiFi Repeater?
What is Netgear extender IP address after setup?
Netgear wifi extender device light not on
My Netgear WiFi extender is not work