iMitlink WiFi Range Extender Setup, Troubleshooting And Review

The imitlink is a super booster wireless dual band wifi repeater. It delivers internet connectivity through a wifi network. This extender is specially designed to extend the existing wifi signal. On the other hand, imitlink is a company name that manufactures top-notch quality products. It also manufactures imitlink wifi range extender that provides high speed wifi network connectivity and coverage with 1200 mbps.

It is equipped with 4 external antennas that deliver smooth and ultimate performance. This wifi extender has much wifi coverage that means it has 1200 square feet. The imitlink wifi repeater covers all the area of home like bedroom, living room, Bathrooms, garages, basements, and even backyard. It is universally compatible that it works with any wifi router, access point, computer, laptop or other.

The setup of the imitlink dual band repeater is effortless with the extender’s WPS button. If you want to setup the extender then you can do the setup with web-based. This extender works very well with the router, it connects up to 20 networking devices at once. This extender wifi coverage says goodbye to the wifi dead zone.

How to connect the imitlink wifi range extender to the existing router?

The imitlink wifi extender delivers ultra-fast wifi network coverage with the dual-band. By which you can watch HD videos with a better wifi network. “If” you seamlessly enjoy the existing wifi network then you should connect the imitlink wifi repeater. There are some points for connecting the extender to the existing router.

  1. First of all, the range extender has to unbox from the packaging box and check the components that come with it.
  2. Then, set the position of the extender. The imitlink range extender is closer to the existing wifi router.
  3. Connect the wireless wifi repeater into the electric outlet and press the power ON/OFF button to power ON the repeater.
  4. Presently, press and hold the WPS button of the imitlink wireless wifi repeater for 10-15 seconds.
  5. Within 2 minutes, press and hold the existing router’s WPS button.
  6. Then, wait until the LED signal turns into the solid green. If the power LED does not indicate the green signal, then you repeat the steps 4 or 5.

Thus, the imitlink wifi range repeater installation points are overs. Now, you can seamlessly take the benefits of the wifi network connectivity in the whole home with reliable wifi connection.

Imitlink wifi range repeater login

The imitlink wireless extender is boost the wifi signal and deliver stable connectivity. “If” you want to imitlink extender login without any hitch then follow the some steps. These steps are given below.

  • Initially, Open any web browser like opera, internet explorer, safari and mozi;;a firefox, which you prefer.
  • Then, enter the repeater’s IP address in the address bar of the browser, hit the enter button.
  • Afterward, the login page of the imitlink wifi range extender appears on the screen.
  • In the repeater login page there are username and passwordtext columns.
  • Here you can input the default username and admin password in their columns.
  • After filling this information, click the section “login”.

Now the login steps of the imitlink wireless signal booster is finished. You can also try to login the range extender by following these steps.

Manual of the imitlink wifi range extender

The imitlink extender provides better, flexible and steady wifi network coverage in the whole home with the four powerful external antennas. By which you can download and share long files without any loading. By reading the imitlink range extender manual, you can find all the information. Manual is that all the information is there, the setup process is also there in the manual. The information of the manual is like Wireless Standard: IEEE802.11b/g/n/ac, Wireless Rate: 1200Mbps, Button: WPS Button or Reset Button, Indicator LED: Power LED, LAN LED, Repeater LED, Wi-Fi LED, Antenna: Four External antennas, package dimension: 6.18 x 5.12 x 2.87 inches, ASIN: B08XZ2HHM1, item weight: 10.2 ounces etc. By reading the imitlink manual, you can find out all the details about the imitlink wireless repeater.

Web-based setup of the imitlink wireless wifi range repeater

If you want to set up the imitlink wifi extender then it is simple that means it is not uncomplicated. It takes less than 4-5 minutes to imitlink extender setup. Then, you can follow the given below setup steps.

  • First and foremost, plug the imitlink wifi extender near the standar wifi router into the electric outlet.
  • Power ON the computer and then the computer connects the imitlink wireless network name using the imitlink’s password, wired(Ethernet cable) or wirelessly(wifi).
  • To set up the wifi extender, you must login to the extender with its IP address, password and username. I already explained the login process in the above steps.
  • Then, click the “setup” wizard section to set up the extender.
  • In this wizard, you set the wireless frequency band 2.4 GHz or 5 GHz.
  • You also set the wireless encryption security WEP, WPA/WPA2, WPA/WPA2 and channel bandwidth.
  • After that, input the wireless network name and password key in their fields.
  • In the eventually, to save the setting click “apply”.

So, these are imitlink wifi range extender setup steps. If you want to change your wireless extender setting. Then you can also change all types of settings through the setup wizard.

Troubleshooting steps of the imtilink wifi range extender is not working

The imitlink extender easily expands the router’s wifi range and reaches the signal in every corner of the home. But sometimes it is not working, and they cause some errors. So there are some troubleshooting steps for this, which will remove these errors.

  • Firstly, the extender is unplugged from the power circuit and press the power on/off button to power off the extender. After that, again power on the extender.
  • The imitlink wifi extender not working then check the power LED status. If the power LED blinks a red light that means connection is poor. To fix this error places the extender and router are placed in the same room.
  • If it does not provide the internet connectivity they cause some error, to resolve these errors contact the internet service provider(ISP).
  • Sometimes the imitlink wifi extender does not provide stable wifi network connectivity, so you should check the firmware update.
  • In the end, if your imitlink wifi range extender is still not working then you should reset the extender.

Imitlink extender review

The imitlink wifi range extender is a wireless internet amplifier that provides a first-class wifi network. I used the wifi router but it does not provide steady connection and does not expand the wifi range. Then someone suggested to me, you can use the imtlink wifi extender, it provides an extremely fast wifi network and easily connects the existing wifi router through the WPS button. It has 4 external antennas that manage and extend the wifi network in long-distance areas.

By which you can seamlessly enjoy gaming consoles, streaming 4K videos, music, and sharing long files to the friends with dual band technology. The dual band frequency delivers 300 Mbps speed in the 2.4 GHz and 867 Mbps speed in the 5 GHz. This extender supports 64/128 bit WEP, WPA/WPA2, WPA/WPA2 wireless encryption to safe the extender to the hackers. That the imitlink wireless wifi repeater is a superior wifi network device for extending and boosting the wifi signal.


How do I reset the imitlink wifi extender through the reset button?

To reset the imitlink extender with the reset button is simple. For this, you can find out the reset button, the reset button is on the left-hand side of the extender. Then you can use paper clip or other components to hold the imitlink extender reset button for about 8-10 seconds. Afterward, leave the reset button and the power signal indicated orange light that means reset is complete.

What should I do if I forget my login password of the imitlink wifi extender?

“If” you forget the login password then you can easily reset the extender with the reset button. Then, visit imitlink web address or IP address and create the new login password, password must be at least 8 characters.

Can I manually update the firmware of the imitlink wifi range extender?

To update the imitlink extender firmware, login the extender’s account with default password and username. Then go to the router’s setting and choose the option “firmware update”. Then click “browse” to upload the firmware file. After that click “upgrade”.

Why does my imitlink wifi extender blink red?

“If” your extender blinks a red light that means it is far away from the existing router then you should place the extender near the wifi router. Maybe the firmware update is available.

Can my imitlink wifi extender work without a router?

Yes, the extender works without a router. Through the ethernet cable you can easily connect the extender to the computer and then enjoy the wifi network connectivity.