IP address, a class C network IP address. It comes from the Network ID, a default login IP address of several routers and cable modems of leading brands. also serves as the default gateway IP address in the cable modem by Frontier, which offers multi-service over voice, TV, and internet.
The process to log into is similar to the login process of other IP addresses from the network In case you have a Frontier Cable Modem, wireless router, or other network devices, which are managed by a command with, you have come to the right place.
To access the web interface of the router, you have to connect the modem or router using a wired connection or wireless connection from the laptop or desktop.

Default Username and Password for

Generally, the default login ID and password for the IP address is printed on the router box or label of a new router. In case you have an old router or the label on the box has been damaged, you can try using the username and password combination given below.

Default Login IP Address:
  • Username: admin
  • Password: Blank or admin

If it is a Frontier Router and if this is your first time setting it up then you have to create a login and password. But if you are trying to log into a configured router with the IP address, use the same username and password you configured. Setup troubleshooting

How to Access a Router with

You have to connect the router, access point, range extender, or model using an Ethernet cable or any wireless connection. You can use the default Wi-Fi name and key that is printed on the router if you are connecting it for the first time.

  • In case the router supports multiple Ethernet Ports, you can use any LAN port for connecting the laptop or desktop or use Wi-Fi for connecting wirelessly.
  • Go to laptop or desktop LAN IP settings and ensure it is in DHCP mode.
How to Access Web Interface?

To access the web interface, you have to open the web browser and access http:// Now it will ask you to insert the username and password. The username will be “admin” and the Password will be “admin” or the password you have created.
When you are done entering the details, press OK to log into the control panel of the router where you will get complete access to the settings of the router. Once you log into your router, configure the wireless setting, website block, port forwarding, or schedule internet for parental control.

How to Change SSID Name and Password?

In case you are using a default name and password for the Wi-Fi, it is better if you change them. For changing the wireless name and password, you have to find the wireless settings in the settings menu of the router. In case, the router supports a dual-band, you need to change the name and password of the wireless band.

Wireless Settings
  • Wi-Fi Key: Create a new password for the Wi-Fi using a combination of Alfa numeric keys with a special character for making a stronger password.
  • Wireless SSID: Wi-Fi name (create a name for the wireless network you prefer)
  • Wireless Password: WPA2-PSK

Press on ‘Apply Settings’ and connect the Wi-Fi laptop, mobile, printer, or other devices using the new username and password.

How to Change LAN Settings?

You can change the IP address without any hassle with other IP series.
Go over to LAN settings, you have to enter

  • IP Address: (change the old IP address with the new one)
  • Subnet Mask:
How to Troubleshoot Login?

In case you are just a beginner and having trouble logging in while you access the router with the default IP address mentioned on the router label or you are setting an error that the site can be reached, you need to follow a few troubleshooting steps for solving the problem. is Not Working?

In case the default IP address taking long to respond or isn’t working, it might be due to a network configuration problem. It might also happen if the router belongs to the IP address that you want to access. Follow the points to solve the login issue step-by-step.

  • Check if the default IP address that is printed on the router label is the same as the IP address you are using for accessing the router.
  • Check the laptop or desktop LAN IP setting to ensure it is in DHCP mode for the router or in for other network devices.
  • Now, you have to use the LAN port to access the admin panel of the router. However, don’t use the WAN port for logging into the router as it won’t work.
  • Ensure that the Login IP address has not been changed with a separate IP.
  • You should use http:// or In case you use http://, then you are going to be redirected to the error page.

In case you are still not being able to access the admin panel of the router, factory reset the device for restoring it to default mode.

Restore with Router Factory Reset?

You can restore the router in the factory default setting with the help of a small hard reset switch available in all brand routers and modems.
Note: When you reset the router into a reset mode, it will erase the configuration that is saved in the router. Thus, the router will not work until the configuration backup is restored as per the internet settings.
Only reset the router, if the configuration backup or other settings has been set up.

Steps to Factory Default Router?

The following are the steps you need to follow for setting the router to factory default.

  • Locate the small reset button beside the Ethernet port.
  • Now, you will have to use a paper and needle and then press the reset button for about 10 seconds.
  • Make sure that you keep checking the LED lights and then release the button and you notice the Power LED and other LED turning on and off.
  • The router is going to restart automatically and it will reboot to factory default settings.
  • The process is going to take 2-3 minutes. Thus, you should wait until Ping, once again.

These simple steps for logging into the router with the IP address for setting up and configuring the settings the first time and also after configuration.

Why Won’t the Phone Let Me on http:// Website?

Your phone might not have the right permission or terminal to access the advanced setting needed for configuring a device, such as a modem or a router.

Why isn’t Loading?

The page might not load either because there is some problem with the router or you haven’t entered the right IP corresponding to the router. To fix the problem reset the router, as well as the system.

Brand Username/Password
Acelink Admin/Admin
AboCom Admin/admin or password
Accton root/(none)
4ipnet Admin/Admin
Actiontec Admin/password
Adb admin/admin or password
AddTron root/(none)
Airlink+ admin/admin
AT&T Uverse Refer to sticker/Refer to sticker
Apple Airport (empty)/public
ASUS admin/admin
Cellspot admin/password
Belkin (blank)/(blank)
CenturyLink Zyxel admin/motorola
Arris admin/password
Cisco cisco/cisco
D-Link admin/(empty)
TP-Link admin/password
Netgear admin/1234
Netgear admin/admin
Linksys (blank)/admin
Ubiquiti ubnt/ubnt
Ubee user/user
XFINITY from Comcast admin/password
Zero One Technology admin/0000
ZyXEL guest/guest
Zoom admin/admin or zoomadsl
ZTE admin/admin
Zonet admin/admin or 1234
Netgear Nighthawk Mesh Wi-Fi 6 system

Private vs. Public IP Address

Every router has two IP addresses, one private and the other public. With a public IP address, you cannot change it as it already going to be provided to you by the ISP. The public IP address of the network doesn’t share the same number pattern as the private IP address. Also, it is the public IP address connecting the device to the internet and sends details of your browsing details to the sites you visit. This detail is then improved for sending back the requested details by you on a certain website. For instance, when you search anything on Google, the public IP address is sent, this then fetches details that you asked for. Thereafter, it sends it back as the search result.
A public IP address can reveal the user’s location. Thus, it can be a matter of concern at times. Using a VPN can help in hiding the IP address.