So are you thinking of changing the Netgear wifi extender password but you failed to do so? Because the current Netgear extender password not working appropriately. But you also don’t know what and how to do it. So you don’t need to panic about anything. We are here to assist you to solve the problem when the password is not working. As the password plays an important role that gives you the access to enter into the homepage of the extender. So that you can make further configuration settings that help to make your network connection more secure and safe. When you access the login page then the wifi default username is admin and the wifi default password is also admin. But sometimes due to any network error or in case, you have changed the password and now you forget it. Then it can occur that the Netgear extender password not working.
This is because the Netgear extender password not working!
Well, there are certain causes that stop you from accessing the login page. If you want to solve your Netgear password problem then you need to understand the issue behind the password that is not working currently. So here are the reasons:
- It happens when you scrambled or mistyped the default password of the Netgear extender.
- This also happens when you recently reset the device. After the reset, you need to create a new password. Thus, it does not accept the old wifi password.
- The internet provider security measures are npot up to the mark.
- Maybe the Netgear extender enables smart connectivity.
- Maybe you are using a defective or faulty wifi router.
- Interruption in the power electrical service.
However, these are the reasons that prevent you from accessing the password of the Netgear range extender.
One simple solution: Netgear extender password not working error
Well, there is an excellent solution that will help you fix the password error. You just need to walk through the password reset process. Simply check out the below-mentioned steps for the reset of the password.
- Well, you can use any sharp object such as a pushpin or a paperclip.
- The sharp object will help you to press or push the reset button for 15 seconds.
- Just press or hold until the indicator light on the range extender starts flashing and then turns into a steady light.
- Simply the reboot of the Netgear wifi booster has been successfully completed.
- After resetting, you need to disconnect the wireless network connection of the device and then reconnect to the wifi after waiting for a few minutes.
- After finding the wireless-N network, connect to it. If you know that is the default network name of the extender.
- Therefore, use an internet browser and navigate to http://192.168.1.254 and go to the login page.
- The credential details are admin for both the default username and password fields. Now use the setup wizard to configure the network connection.
Why is the Netgear extender not accepting passwords?
Are you miserably demanding to login into the Netgear range extender, but fail to do so? The Netgear range extender stops accepting the wifi password. You don’t need to be hyper when the Netgear extender not accepting password. As we are here to save you from this annoying situation. You just need to do a little nudging and then you will find a solution and a cause that rejects accepting the wifi password. Well, the reasons are the same as when the password is not working out. Sometimes you have mistyped or wrongly entered the default password and that is why the extender does not accept the password. Moreover, your family members have performed the reset process with the wifi booster and that is not in your knowledge. And after the reset, the device does not accept the previous password. So make sure that it has not been rebooted or it is then you need to know the new default password.
How to troubleshoot when the Netgear extender not accepting password?
Well, the Netgear wifi extender is not accepting the wifi password, and you are tensed about the security of your network connection. We simply have a simple solution that fixes this problem. You need to reset the Netgear range extender and the process is very simple and can be completed in a breeze.
- Just open the internet browser by ensuring that it should be connected to the wifi network of the Netgear wifi extender.
- Thereafter navigate to mywifiext.net and tap on the enter button.
- After doing so a login window will appear on the computer screen.
- On the login screen, tap on the cancel button, and the router password recovery page displays on the computer screen.
- So you need to enter the serial number of the wifi router and then tap on the continue button.
- When you hit on the continue button then you have to answer the security questions.
- If you are failed to answer the security questions then simply reset the wifi booster. (The reset process has been discussed in the upper section).
- After answering the question hit on the continue button. Thus the admin page will display on our computer screen.
These are the steps to fix the issue when the Netgear extender fails to accept the default wifi password.