Router setup by using the 192.168.1.4 IP address
Troubleshooting tips for the 192.168.1.4 not working
Update Router Firmware by using the 192.168.1.4 IP address
Router factory default setting reset by using the 192.168.1.4 IP address
Steps for changing the router’s local IP Address
The 192.168.1.4 IP address works by searching out your router’s login page which is found through any web interface, safari, Mozilla, Firefox, or any other searching application. It is a Fourth and C class IP address that comes from any standard network device range like IP 192.168.1.0 and broadcast IP 192.168.1.255, etc. Although, the 192.168.l.4 IP is most likely used for some small networking routers and modems such as Proxim and Ricoh or more relevant brands.
By browsing the 192.168.1.1 in the web browser URL bar as the default gateway, routers, access points, modems, default login IP address to configure and set the router and modem settings. To activate your router login account, first, you have to complete the basic and initial configuration process of your router. Afterward, let’s start searching for the 192.168.1.4 login IP by connecting the network on your PC with Its configuring modems, access points, or routers.
Router login with 192.168.1.4 IP address
First, you have to complete the basic configuration of your 192.168.1.4 IP address reserving devices like any router, modem, and any other device. After that, activate your device account using the below-given step-by-step guide.
(i) Find login page using the 192.168.1.4 IP address
- Before using your PC web browser, Mozilla Firefox, or any other searching application first you have to join your same device network in your PC, that you want to login.
- Now, you have to check your PC network status and then launch any searching application on your PC according to your choice.
- In the URL address bar of the web browser, you will put the 192.168.1.4 admin interface of the router in the addressing bar.
- Now, just simply put http://192.168.1.4 (IP address) in your browser URL and then simply click on the “search” option which is already displayed on the PC screen.
- Search this address, just using your router IP address.
- Eventually, your router’s default IP address is 192.168.I.4 which is very helpful to reach up on the router’s login page. After finding the IP address the 192.168.1.4/admin login page opens on your PC screen.
(ii) log in to the router using the 192.168.1.4 IP address
After finding the 192.168.1.4/login IP address, you may be able to activate your router’s login account easily. Thus, below are some steps for logging into your router account.
- Now your router login page which is found by entering the 192.168.1.4 default IP address has been opened on the PC screen.
- Afterward, you have to put all the information that needs logins in it.
- To log in, you must open its login page, fill in your admin’s username and default password.
- The login credentials are already displayed on your router’s packaging box. So, you can see login credentials from there and put them in it.
- In the end, click on the “login” and then finally also click on the “ok” option that is also displayed after completing the login process.
Thus, your router login process is finishing up now by using the 192.168.1.4 IP address. So, these are some above-given steps that are helpful to logging your router’s account.
Router setup by using the 192.168.1.4 IP address
After logging into your router’s login account, you can easily change the settings of your router. There are some steps for managing your router settings that are given below.
- To change the settings of different types of your router, first of all, you have to log in to your router by using the http 192.168.1.4 IP address.
- After login, directly click on the displaying “setting menu” option that is displayed automatically after completing the login process.
- You can also access the 192.168.1.4/setup page by using www.192.168.1.4.
- So, click on it and then after a few seconds, the router’s setup menu page is opened on the PC screen.
- Now, under the setting menu, here you will see options for different types of settings that will either change your router’s network to enhance it or more available settings to also change something in its network.
- Now, click on the setting you want to change and then follow the given on-screen instruction regarding changing its settings properly.
- After changing the settings, click on the “setting save” option and then finally using this IP address-192.168.1.4 router setup is successfully completed.
Thus, the 192.168.1.4 is helpful to manage the router setting, which is now finished properly. You can also manage your extender using the 192.168.1.4 extender setup.
Troubleshooting tips for the 192.168.1.4 not working
If your router 192.168.1.4 is not working, then you have to follow the below-given steps to solve the problem.
-
- Again connect your PC with the router’s network.
- Reboot your PC and also reboot your router.
- Check again your searching address, surely you have to put the wrong IP address in the web browser URL.
- Reset your 192.168.1.4 not working router.
- Reconfigure your router to access the wifi network properly.
- If your 192.168.1.4 is not working that means your router’s network is slow then you have to change your router location.
- Using the 192.168.1.4 setup page, change its settings.
Apart from this, if it does not work then you have to reset your router IP address and you can also use another default IP address for trying to log in.
In the end, verify again through the web browser by typing www.192.168.1.4 in the URL addressing bar.
Update Router Firmware by using the 192.168.1.4 IP address
By using the 192.168.1.4 IP address, you can also update your router’s firmware. These are some steps for updating the router’s firmware which are given below.
- Simply type in web URL http 192.168.1.4 and then search it.
- Then, complete the login and then open the http://192.168.1.4/setup page.
- Now, click on the “system update” option that is already available under the settings menu.
- So, just click on it and update your router firmware according to the on-screen instructions which are useful for updating your router firmware easily.
- Follow the given on-screen instructions and then update your device by choosing the new version.
- The versions of your router are also available on the screen, you have to just choose the new version from the display list.
- After updating your router firmware, you do not turn it off.
- It automatically gives a notification after updating it to restart your device.
- So, wait for the notification and then restart it.
- After restarting your device again connect your PC with its network and get the fastest network with some new features.
Thus, using the router’s IP 192.168.1.4 router firmware update can be easily done.
Router factory default setting reset by using the 192.168.1.4 IP address
In addition, the 192.168.1.4 IP address is also helpful in resetting the factory default settings of the router. By using the below steps you can also reset your router factory default settings.
- Firstly, you have to search 192.168.1.4 IP address using the searching browser.
- After that, directly go into the 192.168.1.4 setup page and then find the factory default setting under the setting menu.
- Reset the router’s factory default settings by following the on-screen instructions. These instructions are mainly helpful for resetting its factory default settings easily.
- By using the router’s reset button, you can easily reset it just for three to fifteen seconds.
- Hold it by using any pin or object and reset it.
Thus, your router’s factory default setting is altogether completed now in a proper way.
Steps for changing the router’s local IP Address
If your router’s 192.168.1.4 IP address is not working, then you can also change its local address. Here are some steps to changing the Router’s local address which is given below.
- Firstly, access the 192.168.1.4/admin page of your router.
- After that, open the main setting menu page and choose the general settings option.
- Under it, similarly, choose or select the “network settings.”
- Then, again choose the “router settings” after finding it.
- Now, click on the next option and also click on the change local IP address.
- In the end, type in the popping up box your router’s previous IP address and also put your router’s new IP address.
- After that, finally, click on the “save changes option”. This option is already displayed on the screen.
So, these are some steps for changing the router’s local IP Address.
Get More
10.10.10.10 Default Admin Router Gateway
Top 10 best mesh Wi-Fi systems
192.168.10.1 Router Default Login
best routers for long range connectivity
What is Netgear extender IP address after setup?